A waterproof deck coating allows you to enjoy your deck for years without premature aging due to the environment. In Utah, it’s even more important to prioritize preventive maintenance because of the extreme climate fluctuations from season to season.

At Packman’s Coatings, our waterproof deck coating applications maintain your outdoor living space’s beauty and function and save you money on repairs over the course of time.

Safety First

One of the top benefits of a waterproof deck is its nonslip surface. You won’t have to warn guests before they step out onto the deck. Safety is a definite priority, especially when your home is the hub for every family gathering and summer party. Prevent injuries and reduce your liability with this safety measure.

A coating also helps limit the occurrence of splinters. That’s a plus for barefoot summer barbecues.

Prevent Material Deterioration

It doesn’t matter how old your deck is — a waterproof protective coating blocks more moisture from entering the wood. This can help prevent rot and decay from overtaking wood decks and keeps the structure strong and intact for decades.

It’s expensive to replace an entire deck. Put your home improvement budget toward improvements, not replacements. Use a waterproof deck coating to extend the life of yours.

Guard Against Property Damage

One major threat to your home is rot, but it’s not an issue many homeowners think about, until it spreads to their home. If your deck is overtaken by mold and mildew, your home’s siding is next. It spreads quickly, and if it’s not stopped, it can lead to major property damage and a big expense for you.

Trust Our Process

At Packman’s Coatings, we use only industry-best waterproof deck coating systems for our clients. It’s essential to put quality at the forefront in a difficult environment like Utah, where seasonal changes can be extreme and inflict significant wear and tear on natural materials.

Spring, summer and fall are ideal seasons for applying a waterproof deck coating, because it’s important the wood to be dry before application. This will ensure you see the greatest long-term benefit.

Interested in learning how much it costs? We can provide a quote for your deck. Don’t wait until water damage has its way! Call Packman’s Coatings today to schedule an appointment.

Driveway resurfacing is cost-effective way to improve your home’s curb appeal. Compared to ripping out and replacing a worn-out driveway, resurfacing has the potential to save you money while delivering the results you want.

Driveway Repair Can Get Expensive

It’s expensive to rip out an old concrete driveway. You need to excavate the crumbling concrete and haul it away. Then the underlying soil must be compacted and prepared for the new concrete mixture. This critical part of the process directly influences how long it will last.

After the new concrete is poured, you have to wait for it to cure before you begin using it. Then you need to fix all the landscaping destroyed in the excavation process. Overall, it takes time and it’s pricey.

Is it worth it? Or do you have another option?

Consider the Driveway’s Age

If your driveway is over a couple of decades old, replacement might be your best bet. You can’t successfully resurface a driveway that is on its way out — you’ll only buy some time. On the other hand, if you only have superficial, aesthetic damage, you can get a new look for a lot less money than a new driveway would cost.

There Is a Middle Ground

Driveway resurfacing works because the entire top layer is removed and replaced, and all the cracks and minor defects are filled. Many homeowners also choose to put a coating over the top layer to the decorative appeal.

Concrete resurfacing is a task that we can complete in a day or two, and you don’t have to wait weeks or months to use it.

Best of all, it will look like you get a whole new driveway, but for a fraction of the price of ripping out and replacing the entire thing. However, for resurfacing to work, it’s essential that the foundation is solid. If your driveway is cracked and crumbling down to its core, resurfacing might not be an option.

What is the best way to tell? Schedule a consultation with Packman’s Coatings.

Driveway resurfacing is an exciting project, and it’s one we’d love to help you accomplish. We’re happy to come to your home and provide a free quote. Check out our gallery of finished projects and call us any time with questions about our process.

An acid stain sounds so intense! Is it really the right finishing method for your concrete floors?

If you aren’t familiar with acid stain, you have no idea what to expect or how it compares to your other flooring options. You might be considering laying flooring on top of your concrete, or going with a different type of concrete coating. But acid stain might deliver the end result you’re looking for.

It’s Indestructible

Acid stained concrete is one of the most durable types of flooring. It’s basically indestructible. It doesn’t fade, chip or stain. You don’t have to do anything to maintain it. You can wax it if you want to, but if you don’t, nothing bad will happen. If durability is your main priority, look no further.

They’re Beautiful

Acid staining concrete is an art as well as a science. You can find incredibly beautiful acid stained floors created by experienced appliers who have been trained in the right techniques. On the other hand, you can find examples of botched applications too.

You can have the beauty of acid stained floors, but only if you choose the right contractor to handle the job. Acid stain can make concrete look like marble, slate or any other stone, real or imagined.

You Can Customize

With an infinite color palette and a wide range of techniques, acid staining is perfect for the creative homeowner who wants their concrete to look like no one else’s, or to mesh with a specific design profile. The finished product’s rich, glossy textures will guarantee you get asked, “This is concrete?”

They’re Affordable

This concrete finishing technique is cost-effective. Compare an acid stain job to the cost of getting natural stone flooring installed, and you’ll be convinced. Plus, it’s a one-time charge and you basically never need to spend another cent on the floor again. It’s now a permanent, maintenance-free part of your home.

It Works Anywhere

We often do acid stain finishing in garages, but there are so many areas of your home or business where this type of floor could work well. A kitchen, restaurant, showroom, office — the possibilities abound.

Say Goodbye to Your Dull Concrete

The dull days are over. Once you’ve seen the potential from acid stain techniques, there is no going back to the dingy, dirty, plain gray concrete flooring you’re used to. Talk to Packman’s Coatings and get a quote on revamping your concrete, whether at home or at your business. We’re happy to handle the job!

Epoxy coatings offer so many advantages, especially if you install them right before you list your property for sale.

Since they last a long time, you can install them long before you sell to take advantage of the benefits yourself. But never overlook how epoxy coatings can make the case to a buyer looking for the best on the market. If you’re trying to drive up home price or simply make your home stand out, installing epoxy coatings is a high-ROI improvement.

What Is a Home Buyer Looking for?

While there are some buyers who want to fix up their new place themselves, most would likely agree that the less work they have to do, the better. And if they’re partial to working in their garage, you can bet that’s one of the areas they will examine to see if the space works for their purposes.

They want low maintenance, high performance and of course, they want a property to look good. Epoxy coatings hit every mark.

Low Maintenance for the Long Term

Once epoxy is installed, you can look forward to years of function without any expensive, time-consuming maintenance. It doesn’t chip or crack like a paint coating would, and it’s easy to keep clean and beautiful. If it gets damaged, it’s a low-cost, easy repair that quickly restores the surface to normal.

High Performance and Durability

Epoxy coatings are chemical-resistant. Since they’re strong enough to be installed in industrial laboratories, they’ll work for your home garage or basement too. The surface will stand up to all types of spills without staining or eroding.

Rolling a heavy toolbox across tile or concrete could wear down the surface over time, but not so with epoxy. Epoxy is moisture resistant and doesn’t scratch. It’s the ultimate in durability, offering a near-permanent solution for the prospective home buyer.

It also makes the environment safer. Since epoxy evens out the floor and covers cracks, it’s less likely anyone will trip and fall. You can also choose a slip-resistant finish so that if you spill a substance like oil, the material’s compound makeup will protect against injuries.

Aesthetics They Can Be Proud Of

Every new homeowner wants to show off their new investment. With epoxy coatings, your garage can be that showroom they’re looking for. Aesthetics play a big role in the overall value of epoxy, since it covers cement stains and unsightly cracks. It’s one of the fastest renovations you’ll ever see!

Get a Quote

How much does it cost? Get a quote for epoxy coatings from Packman’s Coatings and start down the path to making your floors more beautiful.

Your concrete pool deck is the site of so many fun summer memories. But there comes a time when it needs resurfacing to keep providing the same support. When you have settling, erosion and general surface wear and tear, resurfacing can be a great way to give your pool deck the facelift it needs to be functional and beautiful this season.

What are some key giveaways that your pool deck desperately needs maintenance and attention?

Cracking and Scaling

Concrete cracks don’t look good. More importantly, they can be dangerous on a pool deck as a trip hazard.

Concrete cracking is usually a result of settling. Settling is normal after concrete installation, but it can be worse when the soil beneath wasn’t properly compacted before it was poured. Before any resurfacing project can be successful, it’s important that cracks are filled and sealed.

Scaling and flaking occur when the concrete is subjected to the repeated freeze/thaw cycles of winter, which is unavoidable. The porous surface absorbs moisture, then it freezes and expands, putting pressure on the surface. After a few winters go by, this can lead to the loose, flaky texture on the surface known as scaling. Before resurfacing can take place, we’ll grind this surface layer down until it’s gone.

Staining and Discoloration

Gasoline from the lawnmower or stains from a pool party can mar your concrete surface and leave unsightly patches of discoloration. It’s another reason to invest in resurfacing — you don’t want your backyard retreat looking run-down. By installing a new coating, you’re rejuvenating the look, adding value to your property.

Rough Textures or Slippery Surfaces

No one wants to scrape their bare feet on rough concrete. And slippery concrete is even worse — it could cause harmful accidents and injuries you would be responsible for. Resurfacing a concrete pool deck can ensure that you get a newly finished product. Put a nonslip surface into the bargain and create a safer environment.

Proper Prep Is Key

Of course, it’s not possible for just anyone to resurface the area — you need a pro.

The top reason you’ll benefit from the expertise of the team at Packman’s Coatings is that we take surface preparation seriously. Our coatings last longer and perform better because we grind down, prime and prep every surface before we enter the application phase. This ensures quality output and a better value for our customers.

We Love Transforming Outdoor Spaces

At Packman’s Coatings, we fully support your efforts to turn your outdoor areas into the summer escapes you’ve always pictured them to be, regardless of what the years do to your concrete. Trust us for comprehensive, complete concrete pool deck resurfacing services, and you’ll be so happy you chose Packman’s Coatings, you’ll be ready to jump into the pool!

A concrete coating can give your worn-out, aging surfaces the lift they need to look beautiful this spring. Although it’s an instant curb-appeal boost, a concrete coating is beneficial for both the inside and the outside of your home.

As the snow melts and the temperatures turn warmer, your thoughts turn to how you can improve your home. How can you plan on making a new concrete coating a key part of those plans?

Select the Finish Carefully

First, identify the surface you want to coat. Is it your garage floor that needs a face-lift, or is it your patio or pool deck? Depending on the conditions of the environment, we recommend certain finishes over others.

For example, in the case of a pool deck, it’s best to apply a slip-resistant coating that provides extra safety. For a garage, it might be more important to apply a stain-resistant coating so that oil spills don’t soak into the surface.

Check for Proper Water Drainage

Before a concrete coating is applied, it’s important to check for adequate water drainage in the area. Standing water and constant moisture will not allow the materials to properly bond with the concrete. If this is a problem, it’s important to find a solution before the coating process takes place.

Honestly Assess the Concrete’s Condition

Is your concrete in bad shape? Be honest about the state of your slab. If it needs some serious leveling or crack repair, this should take place prior to the coating process. At Packman’s Coatings, we are dedicated to making sure you get the most for your money, so we will advise on the best way to initiate concrete repairs before we install the coating.

Choose Your Color

Finally, one of the most exciting steps in the preparation process is choosing color. Depending on the finish you decide on, you’ll have an array of shades and textures to choose from. From color flakes to metallic finishes to customized designs, our wide selection helps you unleash creativity.

Find the Best Professional for the Job

Since you’re already on Packman’s Coatings website, you are ahead on this step. We’re the premier concrete coatings company in Utah because quality is our first priority. Through careful, conscientious surface preparation and using only the best materials, we ensure our customers have a new concrete coating they love and will last them for years to come. Get a quote from Packman’s today for your concrete surface!

Is installing epoxy a smart addition to your basement renovation budget? It depends on what you’re looking for. Do you like beautiful, waterproof, maintenance-free floors? Most would say yes. If that’s your answer too, epoxy should be one of your top options.

The Renovation Process

If you’re one of the many homeowners who has thought about installing an addition, you probably have come up with some problems that made you rethink your plan.

Before you expand outward, why not explore the possibilities downstairs? Your basement could offer the added living space you are looking for. But what type of floor can you choose that offers durability, a pleasing aesthetic and isn’t susceptible to moisture (a common basement concern)?

Don’t Be Afraid of Water

Installing epoxy is popular for homeowners refinishing their basements because it is waterproof.

Of course, you don’t want to think about your basement flooding, especially after you’ve put so much time and effort into renovating it, but there is always the chance that moisture could be an issue, which is why many contractors don’t recommend laying down wood, which can get ruined in the presence of moisture.

Installing epoxy is a great option because water won’t affect it. It won’t even peel, even if it’s a humid environment.

It’s Extremely Easy to Clean

Do you plan on having your kids’ playroom in your finished basement? You’ll need a floor that’s easy to clean, and epoxy is it.

It’s a smooth finish, so all dirt and dust can be easily swept away and it’s also impervious to stains. If something is spilled and forgotten about, you won’t come back to an ugly permanent stain. If it does start to look like the epoxy is dirty, just mop it with cleaning solution to restore its shine.

It’s Attractive

There are many different colors you can choose from, and you can also jazz up your epoxy coating with flakes or a personalized logo, such as that of your favorite sports team. Installing epoxy allows you to put your personal stamp on the project and create a beautiful space unlike any other.

The Lifetime Value Pays Off

It might take an upfront investment, but epoxy is worth it. It lasts for decades with minimal maintenance. When you compare the lifetime costs to wood, carpet, laminate or even tile, epoxy will likely outlast them all, and with less expensive upkeep.

Get a Quote!

Want to see how much installing epoxy in your basement might cost? Get a free quote from Packman’s Coatings today. We offer no-risk, no-commitment estimates so you can see if epoxy is the right flooring material for you.

Concrete coatings are beautiful, but are they ideal for anywhere and everywhere?

If you’re thinking about installing one somewhere out of the ordinary, it’s probably a question you’re asking yourself. Concrete coatings offer a wide range of benefits that apply to many different environments, but there are cases where changes must be made for the coating to bond successfully and last as long as expected.

You can install concrete coatings anywhere, but there are two instances where repairs and preparation are needed in advance.

Moist, Damp Concrete Presents a Problem

When concrete is constantly moist, any coating applied to it will not yield a good result. Moisture trapped in the slab will cause the dissolution of salts in the concrete and create an alkaline environment, which then contributes to the early deterioration of the surface coating. It is imperative to address the source of concrete slab moisture before the coating is applied for the best results.

Dirty, Grimy Concrete Is a Challenge

All concrete must be cleaned thoroughly prior to coating application, but the extremely stained and dirty surfaces require a bit more work if the coating is going to look good and function well. At Packman’s Coatings, we use a specialized diamond grinding process that strips away all contaminants. While extremely soiled surfaces present a challenge, they’re not impossible for our team!

The Good News: It’s Fixable

On both these counts, you can trust Packman’s Coatings. We can investigate the source of moisture and provide detailed recommendations on how to fix it. In fact, we test every concrete slab for moisture before we apply any coating. It’s just part of making sure that our work delivers the best result and the highest return on investment for our clients.

And of course, we take great care in the preparation process as well, perfectly cleaning even the dirtiest of concrete surfaces.

Durability, Aesthetics and Low Maintenance: What’s Not to Like?

There are so many upsides to concrete coatings. They’re durable. They are aesthetically pleasing. They require little to no maintenance. They contribute to the functionality of your space, offering a resilient, nonslip surface for work areas. If you’re hesitant whether a coating is fit for the purpose you have in mind, don’t hesitate to reach out and ask our team which product is the best option for you.

Packman’s Coatings offers superior epoxy coatings for all types of concrete surfaces. When yours leave something to be desired, we’re the team to call. From preparation to the final finishing touches, our concrete coatings process is easy, cost-effective and exciting. Jump-start your concrete’s transformation — call us today for a free quote!

“What is the concrete coating curing time?” is a question many business and homeowners ask when researching the epoxy coating process. Once you’ve decided that an epoxy finish is a change you need to make to improve your concrete surface, you might be wondering how long it will take. Will you need to wait days, weeks, months? We have answers!

Multiple Steps in the Process

Full disclosure: Getting a new epoxy finish on your concrete isn’t as simple as dumping a bucket of the mixture on the concrete and calling it a day. There are many intricate steps that require time and skill to complete, some of which need to take place before the actual coating is applied.

First, it’s essential to prepare the surface properly. At Packman’s Coatings, we use diamond-grinding techniques to remove old paint or coatings and to even out bumps and rifts. After this, the floor must be cleaned thoroughly and swept of all debris and dust.

Finally, it’s time to start layering the coats. Depending on the finish you are going for, we will lay down multiple coats, including a primer.

Curing Time Is Essential for Good Results

As a general rule of thumb, we typically suggest waiting a full 24 hours before you try to walk on the surface. However, when it comes to driving on it, it will be about a week.

If you’ve just poured new cement and you’d like to install a coating, keep in mind that you will have to wait 30 to 90 days before doing so. The concrete coating curing time could be extended for new concrete.

Follow Instructions Closely

The guidelines for your epoxy coating might vary from your neighbors’, for various reasons. First, the type of coating you choose will dictate its total curing time, depending on the coatings’ chemical makeup. Temperature may also play a factor. Any glossy or nonslip finishes can also change the expected time it takes before your floor is ready to use.

What Can You Expect from Us?

At Packman’s Coatings, we realize many home and business owners want a quick fix to their less-than-desirable concrete surfaces. While we can commiserate, we want our customers to understand that concrete coating curing time plays a pivotal role in the durability of their finished product. We will walk you through every step of the finishing process to ensure you know when it’s safe to start using your new floor! Contact us today to get a free quote for your epoxy coating.

An epoxy coating can transform the look of your concrete floor. But many home and business owners have some common misconceptions that may prevent them from making the improvement.

Check out the list below of concrete epoxy coating myths.

Myth #1: They’re Expensive

Think about the cost of replacing your floor. Now think about the cost of installing a subpar concrete coating. You can see that going with epoxy is an investment that pays off with its durability and easy maintenance. You may have to pay more up front than you would for a cheaper concrete finish, but it’s worth it!

Myth #2: You Can Install it on Your Own

Is buying a DIY epoxy coating kit the same as hiring a professional? No, and it starts with the product.

The mix that comes in the kits is not of the same quality as a professional-grade coating. Also, you must do a significant amount of prep work for the coating to take. Without the experience and the tools, even the most capable DIY-er can run into trouble when it comes to epoxy.

Myth #3: You Need to Re-coat Every Few Years

Epoxy lasts up to 15 years, not one to two. It’s a special product that hardens once applied and doesn’t need repair for a long time.

Myth #4: Paint Is the Same Thing

Epoxy and paint are different. While they may look similar once applied to concrete, don’t make the mistake of believing that paint can achieve similar results. Epoxy is a resin that’s moisture-resistant, creating an impenetrable barrier. No paint can do the same.

Myth #5: The Only Prep Work Necessary Is Cleaning

Your coating specialist is a definite amateur if they tell you all your concrete needs is a quick clean before applying an epoxy layer. A professional knows that it’s vital to remove all loose cement and open the concrete pores before application to achieve the best result. It’s a labor-intensive process to grind down the floor to get it ready for the epoxy, but it’s worth it.

Myth #6: It’s Hard to Maintain

Epoxy doesn’t chip or stain, and it’s super easy to clean. All this maintenance that naysayers are talking about is just a myth!

Can We Help?

Packman’s Coatings is a local Utah business highly experienced at installing beautiful epoxy coatings in both residential and commercial settings. We prepare the surface, coat the concrete and ensure the curing process is off to a great start. We’re the team you can depend on for custom work as well, since our artistry includes creating logos and designs exactly to your specifications. Get in touch with us today to learn more!